|
|
| Step 1:
Selection of Probe Mechanical Design |
|
|
“UV-Surface” - Standard
surface-mount 180o
FOV UV Sensor |
The sensor UV-Surface is a
cosine corrected sensor to be
used for industrial or
scientific UV radiation
measurements of radiation
arriving at a surface,
horizontal or vertical or any
other orientation. On request it
is also available in a
submersible version. Available
calibrated (NIST or PTB
traceable) on request.
UV-Surface 詳細規格 |
|
|
“UV-Cosine” - Waterproof
UV Sensor for outdoor use |
The sensor UV-Cosine is an
outdoor cosine corrected
waterproof sensor (IP68 at
window side, IP65 at plug side,
or, on request IP68 for submerge
applications). The PTFE housing
is stain repellent. Available
calibrated (NIST or PTB
traceable) on request.
UV-Cosine 詳細規格 |
|
|
“UV-Air” - Standard axis
oriented in-chamber UV Sensor |
The sensor UV-Air is a
cosine corrected axial looking
UV sensor with a male thread
(M22x1,5) with many mounting
possibilities inside UV
radiation chambers. Available
calibrated (NIST or PTB
traceable) on request.
UV-Air 詳細規格 |
|
|
“UV-Water” - 10 bar
waterprooof UV Sensor |
The sensor UV-Water is a
waterproof (10 bar or 150ps) UV
sensor to be included into
pressurized water systems (G1/4”
thread). This UV sensor is
suited for use in food and
beverages machinery. On request
it is also available in a
submersible version. Available
calibrated (NIST or PTB
tracelable) on request.
UV-Water 詳細規格 |
|
|
“UV-Water-G3/4” - 10 bar
water pressure proof UV sensor
with G3/4”thread |
The sensor UV-Water-G3/4 is
a water proof (10 bar or 150
psi) UV sensor to be included
into pressurized water systems
(G3/4”thread). This UV sensor is
suited for use in food and
beverages machinery. Available
calibrated (NIST or PTB
traceable) on request.
UV-Water G3/4”詳細規格 |
|
|
“UV-DVGW” - UV Sensor
for DVGW certified water
purifiers |
The sensor UV-DVGW is a
special type suitable for use
with DVGW certified water
purifiers. It complies with the
standard DVGW W294-3(2006).
Always delivered calibrated
according to DVGW requirements.
(Minimum order quantity 15
pieces)
UV-DVGW 詳細規格 |
|
|
“UV-DVGW-160”- UV Sensor
for DVGW (160°) and OE-Norm
certified water purifiers |
The sensor UV-DVGW-160 is a
special type suitable for use
with DVGW and OE-Norm certified
water purifiers. It complies
with the standard DVGW
W294-3(2006) and OE-Norm 5873-2.
Always delivered calibrated
according to DVGW and OE-Norm
requirements. (Minimum order
quantity 15 pieces)
UV-DVGW-160 詳細規格 |
|
|
“UV-Minilog” - UV
Datalogger with PC Software |
The sensor UV-Minilog is a
battery powered UV datalogger
with a large internal data
storage (2 million readings). It
can log data for up to 18 months
without recharging. It is IP67
waterproof and comes with free
PC software. The UV-Minilog can
be equipped with all UV sensors
to be selected at configuration
guide. Available calibrated
(NIST or PTB traceable) on
request.
UV-Minilog 詳細規格 |
|
|
“TOCON-probe” -
Pre-amplified UV Photodetector
with housing |
The sensor TOCON-probe is a
pre-amplified UV Photodiode
inside a robust stainless steel
M12x1 thread body. It is
configured with an integrated
sensor connector (Binder 5-Pin
plug) and comes with 2m
connector cable. The sensor is
easy to mount and connect (only
with voltage output available).
TOCON-probe 詳細規格 |
|
|
“UV-Cure” - Sensor for
high UV-Irradiation with
integrated temperature sensor |
The sensor UV-Cure is an
axial looking UV sensor for
measurement of high UV radiation
at high temperatures (up to
170°C) in curing and drying
processes. It has an integrated
temperature sensor and a
diffuser of radiation hard and
temperature resistant
microporous silica glass. A male
thread (M22x1,5) allows many
mounting possibilities inside UV
radiation chambers. Available
calibrated (NIST or PTB
traceable) on request. Only
available with photocurrent
output.
UV-Cure 詳細規格 |
|
|
|
| Step 2:
Selection of Spectral Sensitivity |
- UV Broadband
- UVA
- UVB/UV-Index
- UVC
|
|
|
| Step 3:
Selection of The Signal Output |
- 0....5V
- 4....20mA
- USB
- Output for flash
measurements
configure the sensor with an
adjustable level output for flash
measurements
詳細規格
|
|
|
| Step 4:
Selection of The Intensity Range |
- 1nW/cm2...10μW/cm2
- 10μW/cm2...100mW/cm2
- 100mW/cm2...10W/cm2
|
|
|
| Step 5:
Selection of The Connector |
- Cable
configure the sensor with a 2m
shielded cable
- Plug
configure the sensor with a male
5pin plug; a 2m cable is provided
- Submersible
configure the sensor to be
submersible
|
|
|
|
-------Accessories----- |
- Measurement Window
WIN294
Measurement window for certified UV
sensors according to DVGW 294-3 and
ONORM M5873
(minimum order quantity 15 pieces)
詳細規格
- Temperature sensor
PT100 sensor integrated into the
probe housing
|
|
|
传感器/变送器/仪表按厂商品牌选用指南
红外光电系列
